D-Link DGS-3427 Product Manual - Page 67
Gratuitous ARP Settings, Gratuitous ARP Settings window
UPC - 790069283161
View all D-Link DGS-3427 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Gratuitous ARP Settings An ARP announcement (also known as Gratuitous ARP) is a packet (usually an ARP Request) containing a valid SHA and SPA for the host which sent it, with TPA equal to SPA. Such a request is not intended to solicit a reply, but merely updates the ARP caches of other hosts which receive the packet. This is commonly done by many operating systems on startup, and helps to resolve problems which would otherwise occur if, for example, a network card had recently been changed (changing the IP address to MAC address mapping) and other hosts still had the old mapping in their ARP cache To view this window, click Administration > Gratuitous ARP Settings, as shown below. Figure 2 - 55 Gratuitous ARP Settings window The following fields can be set or viewed: Parameter Description Send on IPIF status up This is used to enable/disable the sending of gratuitous ARP request packets while an IPIF interface comes up. This is used to automatically announce the interface's IP address to other nodes. By default, the state is Disabled, and only one ARP packet will be broadcast. Send on Duplicate_IP_Detected This is used to enable/disable the sending of gratuitous ARP request packets while a duplicate IP is detected. By default, the state is Disabled. Duplicate IP detected means that the system received an ARP request packet that is sent by an IP address that matches the system's own IP address. Gratuitous ARP Learning This is used to enable/disable updating ARP cache based on the received gratuitous ARP packet. If a switch receives a gratuitous ARP packet, it should add or update the ARP entry. This is Disabled by default. Once you have made the desired gratuitous ARP setting changes, click Apply. To modify a current entry, click the corresponding Modify button, which will reveal the following window to be configured: Figure 2 - 56 Gratuitous ARP Table - Edit window 58