D-Link DGS-3620-52T-SI Product Manual - Page 224
PIM Candidate BSR Settings
View all D-Link DGS-3620-52T-SI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Join/Prune Interval (1-18724) This field will set the interval time between the sending of Join/Prune packets stating which multicast groups are to join the PIM enabled network and which are to be removed or "pruned" from that group. The user may state an interval time between 1 and 18724 seconds with a default interval time of 60 seconds. DR Priority (0-4294967294) Enter the priority of this IP interface to become the Designated Router for the multiple access network. The user may enter a DR priority between 0 and 4,294,967,294 with a default setting of 1. Mode Use the drop-down menu to select the type of PIM protocol to use, Sparse Mode (SM), Dense Mode (DM), or Sparse-Dense Mode (SM-DM). The default setting is DM. State Use the drop-down menu to enable or disable PIM for this IP interface. The default is Disabled. Click the PIM > PIM for IPv4 > PIM Candidate BSR Settings, as shown below: Figure 5-83 PIM Candidate BSR Settings The fields that can be configured are described below: Parameter Description Candidate BSR Hash Mask Len (0-32) Enter a hash mask length, which will be used with the IP address of the candidate RP and the multicast group address, to calculate the hash algorithm used by the router to determine which C-RP on the PIM-SM enabled network will be the RP. The user may select a length between 0 and 32 with a default setting of 30. Candidate BSR Bootstrap Period (1-255) Enter a time period between 1 and 255 to determine the interval the Switch will send out Boot Strap Messages (BSM) to the PIM enabled network. The default setting is 60 seconds. Interface name Enter the interface name. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the View All button to view all the interfaces configured on this switch. Click the Edit button to configure the specific BSR priority. 214