D-Link DGS-3620-52T-SI Product Manual - Page 41
IPv6 Neighbor Settings
View all D-Link DGS-3620-52T-SI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Figure 3-5 Gratuitous ARP Settings window The fields that can be configured are described below: Parameter Description Trap Use the drop-down menu to enable or disable the trap option. By default the trap is disabled. Log Use the drop-down menu to enable or disable the logging option. By default the event log is enabled. Interface Name Enter the interface name of the Layer 3 interface. Select All to enable or disable gratuitous ARP trap or log on all interfaces. Interval Time (0-65535) Enter the periodically send gratuitous ARP interval time in seconds. 0 means that gratuitous ARP request will not be sent periodically. By default the interval time is 0. Click the Apply button, located in the Gratuitous ARP Trap/Log section to accept the changes made in this section. Click the Apply button, located in the Gratuitous ARP Periodical Send Interval section to accept the changes made in this section. IPv6 Neighbor Settings The user can configure the Switch's IPv6 neighbor settings. The Switch's current IPv6 neighbor settings will be displayed in the table at the bottom of this window. To view the following window, click Management > IPv6 Neighbor Settings, as show below: Figure 3-6 IPv6 Neighbor Settings window The fields that can be configured are described below: Parameter Description Interface Name Neighbor IPv6 Address Link Layer MAC Address Enter the interface name of the IPv6 neighbor. Enter the neighbor IPv6 address. Enter the link layer MAC address. 31