D-Link DGS-3620-52T-SI Product Manual - Page 316
Adding an Ethernet ACL Profile, Select profile based on Ethernet MAC Address, IPv4 address
View all D-Link DGS-3620-52T-SI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 316 highlights
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Adding an Ethernet ACL Profile The window shown below is the Add Egress ACL Profile window for Ethernet. To use specific filtering masks in this egress ACL profile, click the packet filtering mask field to highlight it red. This will add more filed to the mask. After clicking the Add Egress ACL button, the following page will appear: Figure 7-49 Add Egress ACL Profile window (Ethernet ACL) The fields that can be configured are described below: Parameter Description Profile ID (1-4) Profile Name Select ACL Type Source MAC Mask Destination MAC Mask 802.1Q VLAN Enter a unique identifier number for this profile set. This value can be set from 1 to 4. Enter a profile name for the profile created. Select profile based on Ethernet (MAC Address), IPv4 address, or IPv6 address. This will change the window according to the requirements for the type of profile. Select Ethernet ACL to instruct the Switch to examine the layer 2 part of each packet header. Select IPv4 ACL to instruct the Switch to examine the IPv4 address in each frame's header. Select IPv6 ACL to instruct the Switch to examine the IPv6 address in each frame's header. Enter a MAC address mask for the source MAC address. Enter a MAC address mask for the destination MAC address. Selecting this option instructs the Switch to examine the 802.1Q VLAN identifier of each packet header and use this as the full or partial criterion for forwarding. 306