D-Link DGS-3620-52T-SI Product Manual - Page 311
Access ID 1-100, Auto Assign, Action, Offset, Time Range Name, Time Range, Settings, Ports, Apply, &
View all D-Link DGS-3620-52T-SI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 311 highlights
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Figure 7-42 Add CPU Access Rule (Packet Content ACL) The fields that can be configured are described below: Parameter Description Access ID (1-100) Type in a unique identifier number for this access. This value can be set from 1 to 100. Auto Assign - Tick the check box will instruct the Switch to automatically assign an Access ID for the rule being created. Action Select Permit to specify that the packets that match the access profile are forwarded by the Switch, according to any additional rule added (see below). Select Deny to specify that the packets that match the access profile are not forwarded by the Switch and will be filtered. Offset This field will instruct the Switch to mask the packet header beginning with the offset value specified: Offset 0-15 - Enter a value in hex form to mask the packet from the beginning of the packet to the 15th byte. Offset 16-31 - Enter a value in hex form to mask the packet from byte 16 to byte 31. Offset 32-47 - Enter a value in hex form to mask the packet from byte 32 to byte 47. Offset 48-63 - Enter a value in hex form to mask the packet from byte 48 to byte 63. Offset 64-79 - Enter a value in hex form to mask the packet from byte 64 to byte 79. Time Range Name Tick the check box and enter the name of the Time Range settings that has been previously configured in the Time Range Settings window. This will set specific times when this access rule will be implemented on the Switch. Ports Ticking the All Ports check box will denote all ports on the Switch. Click the Apply button to accept the changes made. Click the