D-Link DI-774 Product Manual - Page 19

Home > WAN > PPPoE, Home > LAN, Auto-reconnect, Subnet Mask, IP Address, Local Domain,

Page 19 highlights

Using the Configuration Menu (continued) Home > WAN > PPPoE continued Primary/Secondary Enter a DNS Address if you do not wish to use the one provided DNS- by your ISP. (DNS is short for Domain Name System. It trans- lates domain names into IP Addresses). Maximum Idle Time- Enter a maximum idle time during which Internet connection is maintained during inactivity. To disable this feature, enter zero or enable Auto-reconnect. MTU- Maximum Transmission Unit-1472 is default-you may need to change the MTU to conform with your ISP. Auto-reconnect- If enabled, the DI-774 will automatically connect to your ISP after your system is restarted or if the connection is dropped. LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DI-774. These settings may be referred to as Private settings. You may change the LAN IP Address if needed. The LAN IP Address is private to your internal network and cannot be seen on the Internet. Home > LAN IP Address- Subnet Mask- Local Domain Name- The IP Address of the LAN interface. The default IP Asddress is: 192.168.0.1 The subnet mask of the LAN interface. The default subnet mask is 255.255.255.0 The domain name assigned to the router 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98

19
Using the Configuration Menu (continued)
Home > WAN > PPPoE
continued
Home > LAN
LAN is short for Lo-
cal Area Network.
This is considered
your internal network.
These are the IP set-
tings of the LAN inter-
face for the DI-774.
These settings may
be referred to as Pri-
vate settings. You
may change the LAN
IP Address if needed.
The LAN IP Address
is private to your in-
ternal network and
cannot be seen on
the Internet.
Auto-reconnect-
If enabled, the DI-774 will automatically connect to your ISP af-
ter your system is restarted or if the connection is dropped.
MTU-
Maximum Transmission Unit-1472 is default-you may need to
change the MTU to conform with your ISP.
Subnet Mask-
The subnet mask of the LAN interface.
The default subnet mask is
255.255.255.0
IP Address-
The IP Address of the LAN interface.
The default IP Asddress is:
192.168.0.1
Local Domain
Name-
The domain name assigned to the router
Maximum
Idle Time-
Enter a maximum idle time during which Internet connection is
maintained during inactivity.
To disable this feature, enter zero
or enable
Auto-reconnect.
Primary/Secondary
DNS-
Enter a DNS Address if you do not wish to use the one provided
by your ISP. (
DNS is short for Domain Name System. It trans-
lates domain names into IP Addresses).