D-Link DIR-330 Product Manual - Page 25
L2TP - default ip
UPC - 790069300530
View all D-Link DIR-330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Section 3 - Configuration Internet Setup L2TP Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection.Your ISP will provide you with a username and password. This option is typically used for DSL services. Address Mode: Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic. IP Address: Enter the L2TP IP address supplied by your ISP (Static only). Subnet Mask: Enter the Subnet Mask supplied by your ISP (Static only). Gateway: Enter the Gateway IP Address provided by your ISP. DNS: Enter the Primary and Secondary DNS Server Addresses (Static L2TP only). Server IP/Name: Enter the Server IP provided by your ISP (optional). L2TP Account: Enter your L2TP account (username). L2TP Password: Enter your L2TP password and then retype the password in the next box. Maximum Idle Time: Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Always-on (Connect Mode option below). MTU: You may need to change the MTU (Maximum Transmission Unit) for optimal performance with your specific ISP. 1450 is the default MTU. Connect Mode: Select either Always-on, Manual, or Connect On-Demand. D-Link DIR-330 User Manual 20