D-Link DIR-330 Product Manual - Page 74
Con WPA/WPA2-PSK
UPC - 790069300530
View all D-Link DIR-330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Section 4 - Security Configure WPA/WPA2-PSK It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead. The configuration of WPA, WPA2, and WPA/WPA2 uses the same options. 1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1). Click on Setup and then click Wireless Settings on the left side. 2. Click the Manual Wireless Connection Setup button. 3. Next to Security Mode, select Enable WPA, Enable WPA2, or Enable WPA/WPA2. 4. Next to PSK/EAP, select PSK. 5. Next to Network Key, enter a passphrase.. The passphrase must be between 8-63 characters. This passphrase must be entered on your wireless clients to connect. 6. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable encryption on your adapter and enter the same passphrase as you did on the router. D-Link DIR-330 User Manual 69