D-Link DIR-330 Product Manual - Page 40
PPTP/L2TP Settings - vpn example
UPC - 790069300530
View all D-Link DIR-330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Section 3 - Configuration PPTP/L2TP Settings PPTP uses TCP port 1723 for its control connection and uses GRE (IP protocol 47) for the PPP data. PPTP supports data encryption by used MPPE. L2TP uses UDP protocol to transport the PPP data. This is often encapsulated in IPsec encryption instead of MPPE. Enable Setting: Check this box to enable. Name: Enter a name for your VPN. Connection Type: Select PPTP, L2TP, or L2TP over IPsec. VPN Server IP: Enter the VPN Server IP address which is the LAN IP of the router. (i.e. 192.168.0.1). Remote IP Range: Assign a range of IP addresses.The assigned IP range should be on the same IP network but not the in the same range as your DHCP IP range. For example, if your network is 192.168.0.xxx and you set the DHCP range to 192.168.0.100200, the remote IP range cannot be within 192.168.0.100-200. Authentication Select the desired authentication protocol (PAP/ Protocol: CHAP/MS-CHAP v2). MPPE Encryption Select the level of encryption (None/40-bit/128Mode: bit). Authentication Select a user group from the drop-down menu. Database: You can create user groups in the Advanced > User Group section. D-Link DIR-330 User Manual 35