D-Link DIR-330 Product Manual - Page 27
Static IP, IP Address, Subnet Mask, ISP Gateway, DNS Servers
UPC - 790069300530
View all D-Link DIR-330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Section 3 - Configuration Internet Setup Static IP Select Static IP Address if all the Internet port's IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The router will not accept the IP address if it is not in this format. IP Address: Enter the IP address assigned by your ISP. Subnet Mask: Enter the Subnet Mask assigned by your ISP. ISP Gateway: Enter the Gateway assigned by your ISP. MAC Address: The default MAC Address is set to the Internet port's physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. DNS Servers: The DNS server information will be supplied by your ISP (Internet Service Provider.) MTU: You may need to change the MTU (Maximum Transmission Unit) for optimal performance with your specific ISP. 1500 is the default MTU. D-Link DIR-330 User Manual 22