D-Link DIR-330 Product Manual - Page 37
IPSec Settings, Site to Site, Remote User, Pre-shared Key, X.509 Certificate - site to site vpn
UPC - 790069300530
View all D-Link DIR-330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Section 3 - Configuration IPSec Settings Enable: Check this box to enable IPSec. Name: Enter a name for your VPN. Local Net/ Mask: Enter the local (LAN) subnet and mask. (ex. 192.168.0.0/24) Remote IP: Select Site to Site or Remote User for the required VPN configuration. • Site to Site - Network-to-network VPN in which two entire LAN networks are virtually connected across the Internet. If selected, enter the destination gateway IP address in the box which is the public WAN IP or host address of the remote VPN server endpoint. • Remote User - Client-to-server VPN in which remote VPN clients can to connect to the router from the Internet and access Local Network resources. Remote Local If Site to Site is selected, enter the Destination LAN Net/ Mask: subnet and mask of the remote network. (ex. 192.168.1.0/24) Authentication: Select Pre-shared Key or X.509 Certificate Authentication. One of these two authentication methods must be selected. • Pre-shared Key - Manually enter ASCII passphrase in box. • X.509 Certificate - For certificate authentication, certificates must be manually uploaded to the router. See the "Certificates" section for details. D-Link DIR-330 User Manual 32