D-Link DIR-605L Product Manual - Page 38
MAC Filtering
View all D-Link DIR-605L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Section 3 - Configuration MAC Filtering Use MAC Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the Network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Router. Configure MAC Select Turn MAC Filtering OFF, Turn MAC Filtering ON and Filter: ALLOW computers listed to access the network, or Turn MAC Filtering ON and DENY computers listed to access the network. MAC Address: Enter the MAC address you would like to filter. To find the MAC address on a computer, please refer to the Networking Basics section in this manual. DHCP Client Select a DHCP client from the drop-down menu and click the List:
34
D-Link DIR-605L User Manual
Section 3 - Configuration
MAC Filtering
Select
Turn.MAC.Filtering.OFF
,
Turn.MAC.Filtering.ON.and.
ALLOW.computers.listed.to.access.the.network
, or
Turn.
MAC.Filtering.ON.and.DENY.computers.listed.to.access.
the.network
.
Enter the MAC address you would like to filter. To find the
MAC address on a computer, please refer to the Networking
Basics section in this manual.
Select a DHCP client from the drop-down menu and click the
<<
button to populate the required fields.
The schedule of time when the network filter will be enabled.
The schedule may be set to
Always
, which will allow the
particular service to always be enabled. You can create your
own times by clicking
.Add.New
.
Configure MAC
Filter:
MAC Address:
DHCP Client
List:
Schedule:
Use MAC Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the Network.
You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to
the Router.