D-Link DSM-210 User Manual - Page 21
Network Settings
UPC - 790069313578
View all D-Link DSM-210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Network Settings By default the DSM-210 is set to DHCP, allowing your network settings to be automatically configured from your router or DHCP server. Most networks have DHCP enabled. If you are not sure, please verify your router's settings. If you would like to set a fixed IP address for your frame, select Static and press OK. Enter the IP settings in the 5 fields and select OK to save. When DHCP is selected, the fields will be greyed out. Verify your settings listed below Current Settings. IP Address Mode: Displays Static or DHCP. IP Address: The current IP Address of your DSM-210. Subnet Mask: The current subnet mask. Default Gateway: The IP Address of your router or gateway. DNS1/DNS2: The addresses of your DNS server (usually the IP address of your router) SSID: The name of the wireless network you are connected to (Wireless mode only). Channel: Displays the wireless channel you are connected to (Wireless mode only). D-Link DSM-210 User Manual 15