D-Link DSM-320RD Manual - Page 41

The DSM-320RD Setup Wizard (continued) Key (continued) Press the ENTER button on the remote control with this field highlighted to enter a key. The on-screen keyboard will be displayed and you can enter the key. Keys are defined by entering in a string in HEX (hexadecimal - using characters 0-9, A-F) or ASCII (American Standard Code for Information Interchange - alphanumeric characters) format. Encryption 64-bit 128-bit Character Length Example Character Length Example HEX 10 12345678FA 26 456FBCDF123400122225271730 ASCII 5 DMODE 13 2002HALOSWIN1 After entering the appropriate wireless settings for your network, use the down arrow to navigate to the Next button. Press ENTER on the remote control to proceed to the next screen. Current Network Settings Your current network settings are displayed and can be modified at this point. DHCP is the default setting. The DHCP option allows your DHCP enabled device to assign the IP configuration to the DSM-320RD. DHCP If your network has a DHCP server then press the down arrow on the remote control to navigate to the Next button. Once the Next button is highlighted, press ENTER on the remote control to proceed to the next screen. Static If using a static IP address, press ENTER on the remote control with Configuration highlighted. The up arrow and down arrow toggle between the options. Press ENTER to make a selection. The on-screen keyboard or numbers on the remote are used to enter your address settings. Be sure to enter a unique IP address within the same range as the network. After entering the appropriate settings for your network, use the down arrow to navigate to the Next button. Press ENTER on the remote control to proceed to the next screen. Please see the Glossary for an explanation of DHCP and static IP addresses. 41