D-Link DSN-3400-10 Hardware Reference Guide for DSN-3200-10 Valid for fir - Page 18

DSN-3400 External Interfaces, 2.2.4, DSN-3400 LEDs

Page 18 highlights

2.2.2.3 DSN-3400 External Interfaces The back of the xStack DSN-3400 enclosure provides the following external interfaces:  A single 10 GbE XFP transceiver host network connection o (optical or copper depending on what interface you install)  One DB9 RS-232-C diagnostic port  One RJ-45 Fast Ethernet management port Figure 2-6 shows the hardware components on the back of the xStack DSN-3400. Figure 2-6 External Interfaces on the xStack DSN-3400 Enclosure 2.2.2.4 DSN-3400 LEDs Two LEDs next to the XFP connector show transmit (Tx) and receive (Rx) activity on the host network interface. Table 2-6 describes the Tx and Rx LED indicators on the back of the xStack DSN-3400 enclosure. Table 2-6 Host Network Connection LED Indicators on the xStack DSN-3400 Enclosure LED Tx Link Rx Link Color OFF Blinks Green OFF Solid Yellow Blinks Yellow Description There is no transmit activity. There is transmit activity from the xStack DSN-3400. There is no receive activity. A 10GbE connection has been established. There is receive activity with the xStack DSN-3400. 18 Chapter 2 DSN-3000 series Layout

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

18
Chapter 2
DSN-3000 series Layout
2.2.2.3
DSN-3400 External Interfaces
The back of the xStack DSN-3400 enclosure provides the following external interfaces:
A single 10 GbE XFP transceiver host network connection
o
(optical or copper depending on what interface you install)
One DB9 RS-232-C diagnostic port
One RJ-45 Fast Ethernet management port
Figure 2-6 shows the hardware components on the back of the xStack DSN-3400.
Figure 2-6 External Interfaces on the xStack DSN-3400 Enclosure
2.2.2.4
DSN-3400 LEDs
Two LEDs next to the XFP connector show transmit (Tx) and receive (Rx) activity on the host
network interface. Table 2-6 describes the Tx and Rx LED indicators on the back of the
xStack DSN-3400 enclosure.
Table 2-6 Host Network Connection LED Indicators on the xStack DSN-3400 Enclosure
LED
Color
Description
OFF
There is no transmit activity.
Tx Link
Blinks Green
There is transmit activity from the xStack DSN-3400.
OFF
There is no receive activity.
Solid Yellow
A 10GbE connection has been established.
Rx Link
Blinks Yellow
There is receive activity with the xStack DSN-3400.