DELPHI NA10000-11B1 User Manual - Page 35

4. Select the 12- or 24-hour format that you wish to use. 5. Go to the simulator option by pressing or selecting the on-screen page forward icon. Maps settings 1. From the main menu, select "Settings," then "Maps." 6. Enable "Auto Simulate." This allows you to program a route without a GPS fix (i.e., from inside a building) and view the route without going anywhere. Refer to the next section for more information on using the automatic simulator. 7. Enable "Repeat" to let the automatic route simulator run continuously. User settings Quickly clear some or all of the unit's stored information using the user settings. You can also disable the tutorial that is run when you power up the unit. Before using the "Clear Lists" option, you should back up your settings, favorites, and shortcuts to avoid accidental erasure of stored material. For more information, refer to the "Installing Software and New Maps" section, beginning on page 6. 2. The maps settings allow you to manage maps loaded on both the internal memory and MMC and SD cards. If you check the box, maps will only be loaded when the unit is turned on. 1. From the main menu, select "Settings," then "User." 2. Enable or disable the "Show at Startup" box in the tutorial menu. 3. Enable or disable the "Driver Protection" option. Warning: The user of this product is solely responsible for observing safe driving practices-regardless of whether "Driver Protection" is enabled or disabled. DELPHI DISCLAIMS ALL LIABILITY FOR ANY USE OF THIS PRODUCT IN A WAY THAT MAY CAUSE ACCIDENTS, DAMAGE, OR THAT MAY VIOLATE THE LAW. 4. If you wish to clear any of the information that you have stored, simply scroll to the appropriate button in the "Clear Lists" menu and press . 35