DELPHI SA10001 Operation Guide - Page 4

SKYFiTM Audio System Set-Up Your SKYFiTM Audio System Kit contains the following components: 12V. DC Adaptor Battery compartment and antenna cable storage 12V. DC jack Set-up your SKYFiTM Audio System as follows: Antenna 1. Connect the supplied 12V DC power adapter to the socket on the rear of the Audio System, and the other end to a wall outlet. 2. Connect the XM Antenna to the antenna jack located inside the battery and antenna cable storage compartment located on the bottom of the Audio System. The cover must first be removed by pressing down on the two tabs with your thumbs and then sliding away from the front of the Audio System. The antenna cable can either be completely wound around the tabs in the compartment, leaving just enough cable to attach the antenna to the four tabs on the back of the Audio System, or the entire 20 foot cable can be used to position the 4 antenna away from the Audio System for better reception. Lining up all six tabs and then sliding the panel towards the front of the unit until a click is heard will reattach the panel. Make certain that all six tabs are engaged and the rear of the panel is aligned with the rear cover.