DELPHI SA10001 Operation Guide - Page 7
Indoor installation on a flat surface, Outdoor installation or indoor wall mounting - xm
UPC - 689604150894
View all DELPHI SA10001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. Fold the antenna down flat against its base. 3. Position the antenna so that the XM logo is upside down, then place the antenna base against the back of the Audio System so that the four pegs line up with the four slots in the antenna base. 4. Place the antenna so that the base is flush with the back of the Audio System, and then slide down approximately 3/8ths of an inch so that the tab at the base of the Audio System lines up with the slot in the bottom of the antenna. 5. Position the antenna by pivoting the half with the XM logo away from the back of the Audio System and turning the entire Audio System until you get the strongest signal. 6. Use the "Antenna Aiming" screen as described in the previous section to optimize the antenna tilt angle and position. If you are unable to receive a signal, then position the antenna as described in one of the next two sections. Indoor installation on a flat surface To aim your antenna at the satellite: 1. Set antenna flat against its base on a flat (horizontal) surface. 2. Turn the base of the antenna so that the XM logo is facing to the south. 3. Use the "Antenna Aiming" screen to optimize antenna tilt angle and position. 4. If necessary, experiment with different locations near a south-facing window or outside. Your antenna comes with 20 feet of cable. If that is not sufficient to locate the antenna where there is a strong XM signal, purchase a 50-foot cable extension (Delphi model number SA10006) from your SKYFiTM retailer. Up to eight extensions can be used together for up to 40 0 total feet of cable. 7 Outdoor installation or indoor wall mounting The antenna can also be attached vertically to an external or internal wall if that is more convenient than placing it on a horizontal surface. 1. Holding your antenna up, find a wall location that ensures a strong signal. It is recom- mended that you use an extension cord to temporarily locate your SKYFiTM Home stand outdoors while optimizing the antenna location with the " Antenna Aiming" screen.