DELPHI SA50002 Installation Guide - Page 17
down on the tab marked
UPC - 689604153451
View all DELPHI SA50002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
• Once you have a desired antenna location, plan how to route the cable from this • To ease routing of the cable, the antenna connector may be removed by pushing • Use pre-existing wiring channels created by 16 the vehicle manufacturer whenever feasible. location to the receiver, avoiding blocked down on the tab marked "PUSH" and passages and any obstructions that could pulling on the connector (do NOT pull on kink, crimp, twist, or chafe the cable. If the the cables). cable will come into contact with a rough metal opening, use a rubber grommet to prevent damage.
•
Once you have a desired antenna location,
plan how to route the cable from this
location to the receiver, avoiding blocked
passages and any obstructions that could
kink, crimp, twist, or chafe the cable. If the
cable will come into contact with a rough
metal opening, use a rubber grommet to
prevent damage.
•
To ease routing of the cable, the antenna
connector may be removed by pushing
down on the tab marked
“
PUSH
”
and
pulling on the connector (do NOT pull on
the cables).
•
Use pre-existing wiring channels created by
the vehicle manufacturer whenever feasible.
16