DELPHI SA50002 Installation Guide - Page 4
XM Home Antenna Set-up
UPC - 689604153451
View all DELPHI SA50002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
3 XM Home Antenna Set-up Basic signal-strength indicator Antenna Aiming signal-strength indicator Aiming your XM Home Antenna If the SKYFi display says "NO SIGNAL," the antenna needs to be repositioned. In addition, even if you are receiving the XM signal, it is recommended that you optimize the position of your XM Antenna as described in this section enabling you to receive the strongest possible signal and consistent, mute-free reception. Your SKYFi Receiver has a basic signalstrength indicator visible at the top of the display screen during normal listening (figure 3). It has from zero to three vertical bars; three bars represent the strongest signal. A higher-resolution signal-strength indicator screen is available to allow you to optimally aim your XM Antenna. To access and use this screen: 1. Press the menu button on the SKYFi Receiver and select the "Antenna Aiming" option. A screen similar to figure 4 will appear. 2. Adjust the antenna location until the maximum number of "SATELLITE" bars Your SKYFi display has two different signal-strength indicators which will help you optimize the antenna's position. is filled in. SKYFi will receive programming as long as either the satellite or terrestrial signal has two bars filled in; selecting a position with the maximum number of "SATELLITE" bars displayed will ensure a consistently strong signal. Figure 3. Use SKYFi's signal-strength meter to help with rough positioning of your XM Antenna and to see the signal strength during normal use.