DELPHI SA50002 Installation Guide - Page 3
remains, power down the radio, unplug
UPC - 689604153451
View all DELPHI SA50002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
5. After powering up, if the display reads "ANTENNA," check that the antenna con- nection is secure and completely pushed in. Next, change channels (from 0 to 1 or from 1 to 0 if the receiver is not author- ized yet). If the "ANTENNA" message remains, power down the radio, unplug the antenna, and look for any obvious damage. If no damage is detected, reconnect the antenna, turn the unit back on, and change channels again. If the message still appears, contact your retailer. 3 1 Figure 2. Connect accessories to your SKYFi Home Stand as shown. 2 2
2
Figure 2. Connect accessories to your SKYFi Home Stand as shown.
5. After powering up, if the display reads
“
ANTENNA,
”
check that the antenna con-
nection is secure and completely pushed
in. Next, change channels (from 0 to 1 or
from 1 to 0 if the receiver is not author-
ized yet). If the
“
ANTENNA
”
message
remains, power down the radio, unplug
the antenna, and look for any obvious
damage. If no damage is detected,
reconnect the antenna, turn the unit
back on, and change channels again.
If the message still appears, contact
your retailer.
1
2
3