Dacor DYWS4 Use & Care Manuals - Page 24

Gas Leak Test Care and Cleaning 4. Push WineStation Service next to any of the displays. If you suspect your wine dispensing system has a leak, you can run a gas leak test to make sure before calling for service. To test for gas leaks: 1. Open the door on the front of the unit. Then swing the spout cover to the up position. 2. Grasp the regulator assembly with one hand and turn the used gas cylinder counter-clockwise until is comes loose. Bottle Service WineStation Service 5. Push MORE. Regulator assembly Exit PWR STBY LOCK More Argon gas cylinder Gas Cylinder Removal 3. Slide the power switch down one notch to the SERVICE MODE position to access the main service menu. 6. Push GLT to start the test. Exit GLT Set Diag. Temp Screen More ON SERVICE MODE OFF Spout cover release lever (on bottom of spout cover) 7. When the test is complete push EXIT, then slide the power switch up to the ON position. 8. Push up on the spout cover release lever, lower the spout cover and close the front door. 9. Reattach the argon gas cylinder to the bottom of the gas regulator assembly (turn clockwise until snug, do not over-tighten). 22