Dacor EO127 Use & Care Manuals - Page 27

Deluxe Features • The duration time will appear on the display. • The stop time and day will appear on the display. ▲ UPPER HH:MM DURATION TIME DELAY START DURATION TIME 12:25 PM PRESS START START SUN 4/03 10:00 AM STOP SUN 4/03 11:35 AM STOP TIME HELP ▲ UPPER 1:10 PM STOP TIME RESET DURATION TIME 12:25 PM PRESS START START SUN 4/03 10:00 AM STOP SUN 4/03 1:10 PM STOP TIME AM - PM START DAY PM SAT 4/02 HELP • Touch the START key. • If you did not enter a start time, the oven will start immediately and stop after the amount of duration time entered has elapsed. If you entered a start time "WAITING TO START" will appear on the display. The oven will turn on at the start time that was entered and stop cooking after the amount of duration time entered has elapsed. • If you are using one of the cook settings, when the duration time expires, the oven will go into "HOLD" mode for 2 hours. The oven will reduce the temperature to about 150°F to keep the food warm and safe for serving. Turning the Oven Off Using Stop Time • After you have set the start time, touch the STOP TIME key. ▲ UPPER 10:00 AM DELAY START 12:25 PM PRESS START START SUN 4/03 10:00 AM RESET DURATION TIME STOP TIME AM - PM START DAY PM SAT 4/02 HELP • Touch the START key. If you did not enter a start time, the oven will start immediately and stop at the stop time entered. If you entered a start time "WAITING TO START" will appear on the display. The oven will turn on at the start time that was entered and stop cooking at the stop time entered. • If you are using one of the cook settings, when the stop time is reached, the oven will go into "HOLD" mode for 2 hours. The oven will reduce the temperature to about 150°F to keep the food warm and safe for serving. At the end of the hold cycle, the oven will turn off and "CYCLE COMPLETE" will appear on the display. Touch CANCEL/SECURE to clear the control panel. Making Changes or Canceling While the Oven is "WAITING TO START" • If you want to change the temperature, meat probe or delay settings while the oven is waiting to start: 1. Touch EDIT (if you have a double oven touch the EDIT key below the word UPPER or LOWER on the display). 2. Change the settings that need to be changed, then touch START. • If you want to cancel the delayed start, touch the UPPER ON/OFF or LOWER ON/OFF key, for double ovens. For single ovens, touch CANCEL/SECURE. • Enter the time of day you want the oven turn off using the keypad. For example, to turn off the oven at 1:10PM, touch 1, then 1, then 0, then AM - PM if necessary. • If you want to turn off the oven on a different day, touch the STOP DAY key repeatedly until the correct day appears just above the key itself. Meat Probe When you cook foods like roasts and poultry, the internal temperature is the best way to tell when the food is properly cooked. Your oven's meat probe takes the guesswork out of roasting. You can use it to cook food to the exact temperature you desire. You can select meat probe settings from 100°F to 200°F. ▲ UPPER 10:00 AM STOP TIME RESET DURATION TIME 12:25 PM PRESS START START SUN 4/03 10:00 AM STOP SUN 4/03 10:00 AM STOP TIME AM - PM START DAY PM SAT 4/02 HELP warning To prevent the possible of burns, connect and unplug the meat probe using hot pads. IMPORTANT: • Use the handle to insert and remove the meat probe skewer. Also, use the handle on the meat probe plug to insert and disconnect it. Pushing or pulling on either end of the cable could damage the meat probe. continued... 25