Danby DDW611WLED Product Manual - Page 13

Operating Instructions STARTING A WASHING PROGRAM WASH CYCLE TABLE • ( * ) Means: Need to fill rinse in the Rinse-Aid Dispenser. • AHAM DW-1-2005 : This program is the test cycle, the rinse-aid dispenser setting is recommended to Position 6. Program Heavy Cycle selection Information For the heaviest soiled loads, such as pots,pans,casserole dishes and dishes that have been sitting with dried food on them for a while. Description Detergent of cycle pre/main Pre-wash Pre-wash (50°C) Wash (55°C) Wash (50°C) Rinse Rinse (65°C) Drying 3/15g (or3in1) Running time(min) 100 For normally soiled loads, Pre-wash such as pots, plates,glasses Pre-wash Wash (55°C) 3/15g 85 and lightly soiled pans. Rinse (or3in1) Normal standard daily cycle. Rinse (65°C) AHAM DW-1-2005 Drying Pre-wash For lightly soiled loads,such as plates,glasses,bowls and lightly soiled pans. Pre-wash (50°C) Wash (50°C) Rinse Rinse (60°C) 3/15g (or3in1) 75 Light Drying Pre-wash Wash (50°C) For lightly soiled loads, such as Rinse 15g 70 glasses, crystal and fine china. Rinse (60°C) Drying Glass Pre-wash A shorter wash for lightly soiled Pre-wash (50°C) Wash (50°C) loads that do not need drying. Rinse 15g 45 Rinse (55°C) Speed Energy (Kwh) 0.424 0.361 0.311 0.274 0.233 Water (L) 14.5 12 12 9.7 12 Rinse Aid * * * * Soak To rinse dishes that you plan to Pre-wash wash later that day. / 10 0.01 2.5 TURNING ON THE APPLIANCE Starting a washcycle... Draw out the basket (see the section entitled Loading the Dishwasher). Pour in the detergent and insert the plug into the socket. The power supply is 120V/60 Hz. Make sure that the water supply is turned on to full pressure. • Press the program button to select the program you need. • Heavy->Normal->Light->Glass->Speed->Soak • Then press the Start/Reset button, the dishwasher starts. NOTE: When you press the Start/Reset button to pause during washing, the display time will stop blinking and the program will pause and remaining in this cycle until you Restart it again. 12