Danby DDW611WLED Product Manual - Page 6

Operating Instructions PRIOR TO USING FOR THE FIRST TIME A. FILL THE RINSE AID DISPENSER OPENING THE DISPENSER RINSE AID DISPENSER The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes that can leave spots and streaks. It also improves drying by allowing water to sheet off the dishes. Your dishwasher is designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser. To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black. The volume of the rinse aid container is about 110ml. FUNCTION OF RINSE AID Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. ATTENTION Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance. WHEN TO REFILL THE RINSE DISPENSER The amount of rinse aid can be judged by the color of the optical level indicator "C" located next to the cap. When the rinse aid container is full, the whole indicator will be black. As the rinse-aid diminishes, the size of the dark dot decreases. You should never let the rinse aid get below 1 / 4 full. As the rinse aid diminishes, the sizeof the black dot on the rinse aid level indicator changes, as illustrated below. Full C (Rinse-Aid Indicator) 3/4 full 1/2 full 1/4 full should refill to eliminate spotting Empty ATTENTION Clean up any rinse aid spills during filling with an absorbent cloth to avoid excessive foaming during the next wash. Don't forget to replace the cap before you close dishwasher door. 1 To open the dispenser, turn the cap to the "open" (left) arrow and lift it out. 2 Pour the rinse aid into the dispenser, being careful not to overfill. 3 Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow. 5