Danby DDW611WLED Product Manual - Page 18

Installation Instructions STARTING THE DISHWASHER The following things should be checked before starting the dishwasher: 1 The dishwasher is level and fixed properly 2 The water inlet valve is open 3 Is there a leakage at the connections of the conducts? 4 The wires are tightly connected 5 The power is switched on 6 Make sure the inlet and drain hoses are not twisted 7 All packing materials and removable printings should be taken out from the dishwasher Care and maintenance FILTERING SYSTEM The filter prevents larger remnants of food or other objects from getting inside the pump. The filter system consists of a coarse filter, a flat (Main filter) and a micro filter (fine filter). 3 2 1 Main filter 1 Food and soil particles trapped by this filter are pulverized by a special jet on the spray arm and washed down to drain. Fine filter 2 This filter holds soil and food residue in the sump area and prevents it from being redeposited on the dishes during a wash cycle. Course filter 3 Larger items, such as pieces of bone or glass, that could block the drain are trapped in the coarse filter. To remove the items caught by the filter, gently squeeze the tap on the top of this filter and lift it out. FILTER ASSEMBLY The filter efficiently removes food particles from the wash water, allowing it to be re-cyclated during a cycle. For best performance and results, the filter assembly must be regularly cleaned. For this reason it is a good idea to remove the larger food particles trapped in the filter after each wash cycle by rinsing the filter and cup under running water. To remove the filter assembly, pull on the cup handle in the upward direction. 17