Danby DPAC9009 Use and Care Manual - Page 4

Part Identification, Important Safety Information

Page 4 highlights

PART IDENTIFICATION Air Exhaust LCD Display Air Filter Air inlet Front Panel Handles Air outlet Cover Air inlet Wheels Electricity cable Water drain IMPORTANT SAFETY INFORMATION READ ALL SAFETY INFORMATION BEFORE USING ELECTRICAL SPECIFICATIONS 1) Check available power supply and resolve any wiring problems BEFORE installation and operation of this unit. All wiring must comply with local and national electrical codes and be installed by a qualified electrician. If you have any questions regarding the following instructions, contact a qualified electrician. 2) This appliance draws 10 nameplate amps under Cooling Mode and may be used in any properly wired, general purpose 13 amp household grounded receptacle. 3) For your safety and protection, this unit is grounded through the power cord plug when plugged into a matching wall outlet. If you are not sure whether the wall outlets in your home are properly grounded, please consult a qualified electrician. WARNING: Improper connection of the grounding plug can result in risk of Fire, Electric Shock, and/or injury to Persons associated with the appliance. Check with a qualified service representative if in doubt that the appliance is proplery grounded. 4) DO NOT USE PLUG ADAPTERS OR EXTENSION CORDS WITH THIS UNIT. If it is necessary to use an extension cord with this unit, use an approved "air conditioner" extension cord only (available at most local hardware stores). 5) To avoid the possibility of personal injury, always disconnect the power supply to the unit before installing and/or servicing. TABLE 1 Suggested Individual Branch Circuit Nameplate Amps 10 *AWG Wire Size 16 AWG- American Wire Gauge *Based on copper wire at 105°C temperature rating. TABLE 2 Receptacle and Fuse Types Rated Volts 125 Amps 13 Wall Outlet Fuse Size Time Delay Fuse (or Circuit Breaker) 15 Plug Type CAUTION: Do not leave this unit unattended in a space where people or animals cannot react to a failed unit are located. A failed unit can cause extreme overheating or death in such an enclosed, unattended space. 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

PART IDENTIFICATION
IMPORTANT SAFETY INFORMATION
READ ALL SAFETY INFORMATION BEFORE USING
1)
Check available power supply and
resolve any wiring problems BEFORE
installation and operation of this unit. All
wiring must comply with local and national
electrical codes and be installed by a
qualified electrician. If you have any
questions regarding the following
instructions, contact a qualified electrician.
2)
This appliance draws 10 nameplate amps
under Cooling Mode and may be used in
any properly wired, general purpose 13 amp
household grounded receptacle.
3)
For your safety and protection, this unit is
grounded through the power cord plug when
plugged into a matching wall outlet. If you
are not sure whether the wall outlets in your
home are properly grounded, please consult
a qualified electrician.
WARNING:
Improper connection of the
grounding plug can result in risk of Fire,
Electric Shock, and/or injury to Persons
associated with the appliance. Check with a
qualified service representative if in doubt
that the appliance is proplery grounded.
4)
DO NOT USE PLUG ADAPTERS OR
EXTENSION CORDS WITH THIS UNIT. If it
is necessary to use an extension cord with
this unit, use an approved “air conditioner”
extension cord only (available at most local
hardware stores).
5)
To avoid the possibility of personal injury,
always disconnect the power supply to the
unit before installing and/or servicing.
ELECTRICAL
SPECIFICATIONS
TABLE 1
Suggested Individual Branch Circuit
Nameplate Amps
*AWG Wire Size
10
16
AWG- American Wire Gauge
*Based on copper wire at 105°C temperature rating.
TABLE 2
Receptacle and Fuse Types
Rated Volts
125
Amps
13
Wall Outlet
Fuse Size
15
Time Delay Fuse
Plug Type
(or Circuit Breaker)
CAUTION:
Do not leave this unit
unattended in a space where people or
animals cannot react to a failed unit are
located. A failed unit can cause extreme
overheating or death in such an
enclosed, unattended space.
3
Air Exhaust
LCD
Display
Front
Panel
Handles
Wheels
Air Filter
Air inlet
Air outlet
Cover
Electricity
cable
Water drain
Air inlet