Danby DPAC9009 Use and Care Manual - Page 9

OPERATING INSTRUCTIONS (cont'd) DEHUMIDIFIER Note: During dehumidifier mode, the exhaust hose does not have to be vented outdoors. 1) Press the ON/OFF key pad to switch the unit on (Fig. G) 2) Press the MODE key (Fig. H) until the DRY indicator illuminates on the control panel (Fig.I).Each press of the MODE key will advance to a different mode setting (Cool-Dehumidifier-Fan-Heat-Auto). IMPORTANT: There is no fan speed or temperature adjustment during dehumidifier mode. The fan speed is factory set for Low and the dehumidifier operates continuously (non-stop) regardless of ambient humidity level or set temperature. Fig. G Fig. H Fig. I FAN NOTE: During Fan Mode, the exhaust hose does not have to be vented outdoors. 1) Press the ON/OFF key pad to switch the unit on (Fig. G). 2) Press the MODE key (Fig. H) until the FAN indicator illuminates on the control panel (Fig. J). Each press of the MODE key will advance to a different mode setting (Cool-Dehumidifier-Fan-HeatAuto). Fig. J 3) Press the FAN Key (Fig. K) to select the desired FAN SPEED setting. Your selection will appear on the control panel. Each press of the fan key will advance to a different fan speed (High- Med- Low) as shown in Fig. L. Fig. K Fig. L 8