Danby DPAC9009 Use and Care Manual - Page 5

IMPORTANT SAFETY INFORMATION POWER SUPPLY CORD The power cord supplied with this air conditioner contains a device that senses damage to the power cord. To test if your power cord is working properly, you must do the following: 1) Connect the power supply cord to an electrical outlet. 2) The power supply cord has two buttons located on the head of the plug. One button is marked "TEST", and the other is marked "RESET". Press the "TEST" button; you will hear a click as the "RESET" button pops out. 3) Press the "RESET" button; you will hear a click as the button engages. 4) The power supply cord is now energized and supplying electricity to the air conditioner (on some products this is also indicated by a light on the plug head). NOTE: The power cord supplied with this air conditioner contains a current leakage detection device designed to reduce the risk of fire. In the event the power supply cord is damaged, it cannot be repaired and must be replaced with a new cord from the product manufacturer. • Under no circumstances should this device be used to turn the unit on or off. • The "RESET" button must always be pushed in (engaged) for correct operation. • The power supply cord must be replaced if it fails to reset when the "TEST" button is pushed in. ENERGYSAVING TIPS Your Danby appliance is designed to be highly efficient in energy savings. Follow these recommendations for greater efficiency. 4) Start your air conditioner before the 1) Select a thermostat setting that suits your outdoor air becomes hot and comfort needs and leave at that chosen uncomfortable, to avoid an initial period of setting. discomfort while the unit is cooling off the room. Use of the automatic start/stop 2) The air filter is very efficient in removing programmable TIMER feature can be a airborne particles. Keep the air filter clean major asset in this regard if utilized to the at all times. fullest extent. 3) Use drapes, curtains or shades to keep 5) When outdoor temperatures are cool direct sunlight from penetrating and heating enough, turn the air conditioner off and use room, but do not allow drapes or curtains to the FAN MODE. This circulates indoor air, obstruct the air flow around the unit. providing some cooling comfort while utilizing less electricity. 4