Danby DWC93BLSST Product Manual - Page 12

Trouble Shooting Occasionally, a problem is minor and a service call may not be necessary - use this trouble shooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot or Danby's Toll Free Number 1-800-263-2629. Problem No Power Possible Cause What to do A fuse in your home may be blown or the circuit breaker tripped Power surge Plug not fully inserted into wall outlet Replace fuse or reset circuit breaker Unplug the Wine Cooler, wait a few seconds and then plug it back in Make sure the 3-prong plug is fully inserted into outlet Cabinet Temperature too High Temperature setting Verify the temperature control setting. Adjust if neccessary Door not shut properly or opened excessively Ensure that the door is fully closed and that the gasket is sealing against the cabinet. Open the doors only as needed and for short periods of time Exhaust vent is obstructed Verify there is nothing blocking the front mounted exhausting vent Recently added a large quantity of warm bottles to the cabinet Limit the quantity of warm bottles being introduced to the cabinet at the same time. Attempt to stagger the load introduction if possible "Clicking" Noise Condensation on the cabinet and/or doors Normal sound No user intervention is required as this sound is normal during the operation of the appliance. This audible 'clicking' noise may be heard as the wine cooler ends or begins a cooling cycle High humidity conditions in the home Door not shut properly or opened excessively The condensation will subside once humidity conditions return to normal Ensure that the door is fully closed and that the gasket is sealing against the cabinet. Open the door only as needed and for short periods of time 11