Danby DWC93BLSST Product Manual - Page 8

Operating Instructions, Storage, Shelf Instructions - parts

Page 8 highlights

Operating Instructions Wine Storage IMPORTANT  • The maximum* capacity of the DWC93BLSST is 34 (750 ml) wine bottles. • Store wine in sealed bottles only. * When stocked as per instructions. In order to achieve the maximum storage capacity of thirty-four (34) bottles, it will be necessary to position the bottles alternately on the upper six shelves, as shown in Fig B. This will allow for the storage of five (5) 750 ml bottles per shelf in each of the six shelves. The bottomcan hold an additional four (4) bottles. Shelf Instructions IMPORTANT! Do not cover any part of the shelves with aluminum foil or any other material that will prevent adequate air circulation within the cabinet. To prevent damaging the door gasket, make sure to have the door opened all the way when pulling the shelves. - For easy access to the bottles, you must pull the shelves approximately 1/3 of its depth out of the rail compartment. These wine cabinets, however, are designed with a notch on each side of the shelf tracks to prevent bottles from falling. To remove the shelf : - align the shelf gap (left and right) under the square plastic block, lift up and tilt the shelf. (Fig.C) Fig.C 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26

Operating Instructions
Wine
Storage
• The maximum* capacity of
the DWC93BLSST is 34
(750 ml) wine bottles.
• Store wine in sealed bottles
only.
* When stocked as per
instructions.
7
Shelf Instructions
In order to achieve the
maximum storage capac-
ity of thirty-four (34)
bottles, it will be neces-
sary to position the
bottles alternately on
shown in Fig B
Fig B
. This will
allow for the storage of
five (5) 750 ml
750 ml
bottles per
six shelves. The bottom-
can hold an additional
four (4) bottles.
To prevent damaging the door gasket, make sure to have the door opened all the way when
- For easy access to the bottles, you must pull the shelves approximately 1/3 of its depth out
of the rail compartment. These wine cabinets, however, are designed with a notch on each
side of the shelf tracks to prevent bottles from falling.
To remove the shelf :
IMPORTANT!
Do not cover any part of the shelves with aluminum foil or any
other material that will prevent adequate air circulation within
the cabinet.
IMPORTANT
IMPORTANT
Fig.C
the upper six shelves, as
shelf in each of the
pulling the shelves.
- align the shelf gap (left and right) under the square plastic block, lift up and tilt the shelf. (Fig.C)