Dell Alienware Area-51 Threadripper Edition R7 Service Manual - Page 56
Removing the memory modules, Prerequisites, Procedure
View all Dell Alienware Area-51 Threadripper Edition R7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Removing the memory modules WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the stability foot. 2 Remove the left and right side-panels. See "Removing the side panels". Procedure 1 Lay the chassis on the right side. 2 Locate the memory modules on the system board. 3 Push the securing clip away from the memory module. 4 Remove the memory module from the memory-module slot. NOTE: Repeat step 2 to step 4 to remove any other memory modules installed in your computer. 56