Dell Alienware Area-51 Threadripper Edition R7 Service Manual - Page 60
Replacing the graphics card, Procedure
View all Dell Alienware Area-51 Threadripper Edition R7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Replacing the graphics card WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Align the graphics card with the PCI-Express card connector on the system board. 2 Place the card in the connector and press down firmly. Ensure that the card is firmly seated. 3 Press and hold the securing tab on the clamp. 4 Push the clamp back towards the bracket. 5 Rotate the PCIE door to close. 60
Replacing the graphics card
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
Before working inside your computer
. After working inside your computer, follow the instructions
in
After working inside your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
.
Procedure
1
Align the graphics card with the PCI-Express card connector on the system board.
2
Place the card in the connector and press down firmly. Ensure that the card is firmly seated.
3
Press and hold the securing tab on the clamp.
4
Push the clamp back towards the bracket.
5
Rotate the PCIE door to close.
60