Dell Alienware Area-51 Threadripper Edition R7 Service Manual - Page 82
Replacing the front-bezel heat-sensor cable, Procedure
View all Dell Alienware Area-51 Threadripper Edition R7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Replacing the front-bezel heat-sensor cable WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Route the front-bezel heat-sensor cable through the bracket. 2 Align the tab on the front-bezel heat-sensor cable on the chassis. 3 Push the release tab on the front-bezel heat-sensor cable and press it into place. 4 Align and place the PCI fan holder from the chassis. 5 Replace the two screws (M3x5.25) that secure the PCI fan holder to the chassis. 6 Route the front-bezel heat sensor cable through the routing guides on the chassis. 7 Connect the front-bezel heat sensor cable to the system board. 82