Dell Alienware Area-51 Threadripper Edition R7 Service Manual - Page 71
Replacing the top fan, Procedure, Post-requisites
View all Dell Alienware Area-51 Threadripper Edition R7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Replacing the top fan WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Align the tabs on the top fan with the slots on the chassis and slide the fan until it snaps into position. 2 Replace the screw (#6-32x6) that secures the top fan on the chassis. 3 Connect the top fan cable from the connector on the system board. For more information on the top fan cable connector, see "system-board components". Post-requisites 1 Replace the left and right side-panels. See "Replacing the side panels". 2 Replace the stability foot. 71