Dell Alienware m16 R1 AMD Service Manual - Page 45
Display assembly, Removing the display assembly
![]() |
View all Dell Alienware m16 R1 AMD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Display assembly Removing the display assembly Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the rear-I/O cover. About this task The following image(s) indicate the location of the display assembly and provides a visual representation of the removal procedure. Steps 1. Peel the tape securing the camera cable to the system board. 2. Disconnect the camera cable from the system board. 3. Disconnect the display cable from the system board. 4. Peel the tapes securing the display cable to the system board and lift the display cable off the system board. 45
![](/manual_guide/products/dell-alienware-m16-r1-amd-service-manual-ff96588/45.png)
Display assembly
Removing the display assembly
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
rear-I/O cover
.
About this task
The following image(s) indicate the location of the display assembly and provides a visual representation of the removal procedure.
Steps
1.
Peel the tape securing the camera cable to the system board.
2.
Disconnect the camera cable from the system board.
3.
Disconnect the display cable from the system board.
4.
Peel the tapes securing the display cable to the system board and lift the display cable off the system board.
45