Dell Alienware m16 R1 AMD Service Manual - Page 60
Audio board, Removing the audio board
![]() |
View all Dell Alienware m16 R1 AMD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
5. Install the wireless card. 6. Install the 2230 solid-state drive in slot three. 7. Install the 2280 solid-state drive or 2230 solid-state drive in slot one and two, whichever applicable. 8. Install the base cover. 9. Follow the procedure in After working inside your computer. Audio board Removing the audio board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 2230 solid-state drive in slot three. 4. Remove the 2280 solid state drive or 2230 solid-state drive in slot one and two, whichever applicable. 5. Remove the wireless card. 6. Remove the small fan. 7. Remove the rear-I/O cover. 8. Remove the battery. 9. Follow the procedure from step 1 to step 9 in Removing the system board. NOTE: The system board can be removed and installed along with the memory, audio board, and fan and heat sink-assembly. This simplifies the removal and installation procedure and avoids breaking the thermal bond between the system board and heat sink. About this task The following image(s) indicate the location of the ethernet and audio board and provides a visual representation of the removal procedure. Steps 1. Turn the system-board assembly over. 2. Remove the two screws (M2x4) that secure the audio board to the system-board assembly. 60
![](/manual_guide/products/dell-alienware-m16-r1-amd-service-manual-ff96588/60.png)