Dell Alienware m16 R1 AMD Service Manual - Page 55
Steps
View all Dell Alienware m16 R1 AMD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Steps 1. Turn the system board over. 2. Install the fan and heat-sink assembly. 3. Install the audio board. 4. Turn the system-board assembly over. 5. Using the alignment posts, place the system-board assembly on the palm-rest and keyboard assembly. 6. Replace the eighteen screws (M2x4) and one screw (M2x6) that secure the system board to the palm-rest and keyboard assembly. NOTE: Replace the two screws (M3x7.65, #2) that secure the M.2 2230 SSD slots on the system board. This step is applicable only for the computers shipped with M.2 2230 solid-state drives. 7. Place the Type-C bracket on the system board and align the screw holes on the bracket to the screw holes on the system board. 8. Replace the two screws (M2x2.5) that secure the Type-C bracket to the system board. 55