Dell Alienware m16 R1 AMD Service Manual - Page 63
Installing the power button
View all Dell Alienware m16 R1 AMD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Installing the power button Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task The following image(s) indicate the location of the power button and provides a visual representation of the installation procedure. Steps 1. Align and place the power button, along with its cable, into the slot on the palm-rest and keyboard assembly. 2. Connect the power-button cable and close the latch to secure the cable. 3. Align the screw holes on the power-button bracket to the screw holes on the palm-rest and keyboard assembly. 4. Replace the three screws (M2x2.5) that secure the power-button bracket to the palm-rest and keyboard assembly. Next steps 1. Follow the procedure from step 5 to step 13 in Installing the system board. 2. Install the battery. 3. Install the rear-I/O cover. 4. Install the wireless card. 5. Install the 2230 solid-state drive in slot three. 6. Install the 2280 solid-state drive or 2230 solid-state drive in slot one and two, whichever applicable. 7. Install the base cover. 8. Follow the procedure in After working inside your computer. 63