Dell B3465dnf Mono Laser Printer Users Guide - Page 143
Network Card menu, TCP/IP menu, Network/Ports, Standard Network, Network [x], Network [x] Setup
View all Dell B3465dnf Mono manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Understanding the printer menus 143 Network Card menu To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > Network Card • Network/Ports > Network [x] > Network [x] Setup > Network Card Use To View Card Status Connected Disconnected View the connection status of the network card. View Card Speed View the speed of an active network card. Network Address UAA LAA View the network addresses. Job Timeout 0-255 seconds Set the amount of time it takes for a network print job to be canceled. Notes: • 90 seconds is the factory default setting. • A setting value of 0 disables the timeout. • If a value of 1-9 is selected, then the setting is saved as 10. TCP/IP menu To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > TCP/IP • Network/Ports > Network [x] > Network [x] Setup > TCP/IP Note: This menu is available only in network printers or printers attached to print servers. Use To Set Hostname Set the current TCP/IP host name. Note: This can be changed only from the Embedded Web Server. IP Address View or change the current TCP/IP address. Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that support BOOTP and RARP. Netmask View or change the current TCP/IP netmask. Gateway View or change the current TCP/IP gateway. Enable DHCP On Off Specify the DHCP address and parameter assignment. Note: On is the factory default setting. Enable RARP On Off Specify the RARP address assignment setting. Note: Off is the factory default setting.