Dell B3465dnf Mono Laser Printer Users Guide - Page 172

Understanding the printer menus 172 Use Auto Reduction On Off Paper Source Auto Tray [x] Multipurpose Feeder Sides (Duplex) Off On Separator Sheets Off Before Job After Job Separator Sheet Source Tray [x] Multipurpose Feeder Fax Footer On Off Max Speed 2400 4800 9600 14400 33600 Fax Forwarding Print Print and Forward Forward Forward to Fax E‑mail FTP LDSS eSF Forward to Shortcut To Scale an incoming fax job so that it fits the size of the paper loaded in the designated fax source. Note: On is the factory default setting. Specify the paper source for printing incoming fax jobs. Note: Auto is the factory default setting. Enable two‑sided (duplex) printing for incoming fax jobs. Notes: • Off is the factory default setting. • This menu item appears only when a print duplexer is installed. Enable the printer to include separator sheets for incoming fax jobs. Note: Off is the factory default setting. Specify where the printer will pick the separator sheet. Note: Tray 1 is the factory default setting. Print the transmission information at the bottom of each page from a received fax. Note: Off is the factory default setting. Specify the maximum speed in baud at which faxes are received. Note: 33600 is the factory default setting. Enable forwarding of received faxes to another recipient. Note: Print is the factory default setting. Specify the type of recipient to which faxes will be forwarded. Notes: • Fax is the factory default setting. • This menu item is available only from the Embedded Web Server. Enter the shortcut number which matches the recipient type (Fax, E-mail, FTP, LDSS, or eSF). Note: You can enter up to 16 characters.