Dell DS-32M2 Installation Guide - Page 12
DS-32M Rails Installation, DS-32M Short Rails, for the CLARiiON Rack/Cabinet
View all Dell DS-32M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installing the DS-16M and DS-32M Rails DS-32M Rails Installation There are two different length rails: the short rails range from 20.5 inches to 27 inches. The long rails range from 27 inches to 34 inches. Each kit contains two different length rear rail mounts. Use the rail length that is appropriate for your rack/cabinet. Front DS-32M Short Rails (for the CLARiiON Rack/Cabinet) Rear Front DS-32M Long Rails (for 3rd Party Racks/Cabinets) Rear The front and rear flanges of the DS-32M rails have four screw holes. See the figure below. Front Flange Rear Flange NOTE: If you are installing both a DS-16M2 and DS-32M2 switch, the DS-16M2 should be positioned at the top of the rack/cabinet, located above the DS-32M2 switch. 12 EMC Departmental Switches DS-16M2 and DS-32M2 Installation Guide