Dell DS-32M2 Installation Guide - Page 22

Installing the DS-16M2 and DS-32M2 Switches ! CAUTION If you are removing the switches from the cabinet, you must remove the top switch from the back of the cabinet. You can remove all switches below the top switch from the front. 15. Attach the fibre-optic cables to the switch and run the cables from the switch to the appropriate device. Ensure each fibre-optic cable has a minimum bend radius of 2 inches. Copyright © 2002 EMC Corporation. All Rights Reserved. EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without notice. THE INFORMATION IN THIS PUBLICATION IS PROVIDED "AS IS." EMC CORPORATION MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WITH RESPECT TO THE INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Use, copying, and distribution of any EMC software described in this publication requires an applicable software license. Trademark Information EMC2, EMC, CLARiiON, and Navisphere are registered trademarks and Access Logix, SnapView and MirrorView are trademarks of EMC Corporation. All other trademarks mentioned herein are the property of their respective owners. 22 EMC Departmental Switches DS-16M2 and DS-32M2 Installation Guide