Dell EqualLogic PS6210XV PS6210 Hardware Owners Manual - Page 10

Back-Panel Features and Indicators, Front-Panel Features and Indicators 2U Array

Get Dell EqualLogic PS6210XV PDF manuals and user guides View all Dell EqualLogic PS6210XV manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

PS6210 Hardware Owner's Manual 1 Basic Storage Array Information Figure 4: Front-Panel Features and Indicators (2U Array) Figure 5: Front-Panel Features and Indicators (4U Array) Table 1: Front-Panel Feature Descriptions Item Indicator Icon Description The array status LED lights when the array power is on. • Off-No power. Array status 1 LED • Steady blue-Array status is OK. • Slow blinking blue-Array status is Standby mode. • Blinking blue-Administrator request to identify the array (see the Group Manager online help). • Steady amber-Critical status. • Blinking amber-Warning. The power LED is ON when at least one power supply is supplying power to the array. 2 Power LED • Off-No power, or the array is in Standby mode. • Steady green-Array has at least one power supply providing power, and array is not in Standby mode. Drive release 3 latch None Enables you to remove a drive from the array. The LEDs are part of a built-in chassis control panel that is not hot-swappable and can be replaced only by support personnel. During the array power-up sequence, these LEDs will cycle through different states until the array is fully started and the active control module has been determined. Back-Panel Features and Indicators The back of a PS6210 with AC power is shown in Figure 6 and Figure 7. Table 2 describes the back-panel features. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Figure 4: Front-Panel Features and Indicators (2U Array)
Figure 5: Front-Panel Features and Indicators (4U Array)
Table 1: Front-Panel Feature Descriptions
Item Indicator
Icon
Description
1
Array status
LED
The array status LED lights when the array power is on.
•
Off—No power.
•
Steady blue—Array status is OK.
•
Slow blinking blue—Array status is Standby mode.
•
Blinking blue—Administrator request to identify the array
(see the Group
Manager online help).
•
Steady amber—Critical status.
•
Blinking amber—Warning.
2
Power LED
The power LED is ON when at least one power supply is supplying power to
the array.
•
Off—No power, or the array is in Standby mode.
•
Steady green—Array has at least one power supply providing power, and
array is not in Standby mode.
3
Drive release
latch
None
Enables you to remove a drive from the array.
The LEDs are part of a built-in chassis control panel that is not hot-swappable and can be replaced
only by support personnel. During the array power-up sequence, these LEDs will cycle through
different states until the array is fully started and the active control module has been determined.
Back-Panel Features and Indicators
The back of a PS6210 with AC power is shown in
Figure 6
and
Figure 7
.
Table 2
describes the back-panel features.
4
PS6210 Hardware Owner's Manual
1 Basic Storage Array Information