Dell Force10 C300 FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series Tera - Page 1009

Version 7.5.1.0 pre-Version 6.1.1.1 Introduced on C-Series Introduced on E-Series Usage Only the routes within an area are summarized, and that summary is advertised to other areas by the Information ABR. External routes are not summarized. Related Commands area stub router ospf Create a stub area. Enter the ROUTER OSPF mode to configure an OSPF instance. area stub c e s Configure a stub area, which is an area not connected to other areas. Syntax area area-id stub [no-summary] To delete a stub area, enter no area area-id stub. Parameters area-id no-summary Specify the stub area in dotted decimal format (A.B.C.D.) or enter a number from zero (0) to 65535. (OPTIONAL) Enter the keyword no-summary to prevent the ABR from sending summary Link State Advertisements (LSAs) into the stub area. Defaults Disabled Command Modes ROUTER OSPF Command History Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.1 Introduced support for Multi-Process OSPF. Introduced on S-Series Introduced on C-Series Introduced on E-Series Usage Information Related Commands Use this command to configure all routers and access servers within a stub. router ospf Enter the ROUTER OSPF mode to configure an OSPF instance. area virtual-link c e s Set a virtual link and its parameters. Syntax area area-id virtual-link router-id [[authentication-key [encryption-type] key] | [message-digest-key keyid md5 [encryption-type] key]] [dead-interval seconds] [hello-interval seconds] [retransmit-interval seconds] [transmit-delay seconds] To delete a virtual link, use the no area area-id virtual-link router-id command. Open Shortest Path First (OSPFv2 and OSPFv3) | 1009