Dell Force10 C300 FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series Tera - Page 35

Usage Information In this streamline copy command, the source image is copied to the primary RPM and then, if specified, to the standby RPM. After the copy is complete, the new image file path on each RPM is automatically configured as the primary image path for the next boot. The current system image (the one from which the RPM booted) is automatically configured as the secondary image path. FTOS supports IPv4 and IPv6 addressing for FTP, TFTP, and SCP. Note: The keywords boot-image, synchronize-rpm, and external can be used on the Primary RPM only. copy running-config startup-config c e Copy running configuration to the startup configuration. Syntax copy running-config startup-config {duplicate} Command Modes EXEC Privilege Command History Version 7.5.1.0 Version 6.3.1.0 Introduced on C-Series Introduced Usage This command is useful for quickly making a changed configuration on one chassis available on Information external flash in order to move it to another chassis. When you use the copy running-config startup-config duplicate command to copy the running configuration to the startup configuration, FTOS creates a backup file on the internal flash of the startup configuration. delete c e s Delete a file from the flash. Once deleted, files cannot be restored. Syntax delete flash-url [no-confirm] Parameters flash-url no-confirm Enter the following location and keywords: • For a file or directory on the internal Flash, enter flash:// followed by the filename or directory name. • For a file or directory on the external Flash, enter slot0:// followed by the filename or directory name. (OPTIONAL) Enter the keyword no-confirm to specify that FTOS does not require user input for each file prior to deletion. Command Modes EXEC Privilege Command History Version 7.6.1.0 Introduced on S-Series Version 7.5.1.0 Introduced on C-Series E-Series original Command File Management | 35