Dell Force10 C300 FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series Tera - Page 43
show file, Syntax, Parameters, Command Modes, Command, History, Example, Related
View all Dell Force10 C300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
boot network boot system boot system gateway Set the location of configuration files from a remote network. Set the location of FTOS image files. Specify the IP address of the default next-hop gateway for the management subnet. show file ces Display contents of a text file in the local filesystem. Syntax show file filesystem Parameters filesystem Enter one of the following: • flash: for the internal Flash • slot0: for the external Flash Command Modes EXEC Privilege Command History Version 7.6.1.0 Introduced on S-Series Version 7.5.1.0 Introduced on C-Series E-Series original Command Example Command output example (Partial): show file FTOS#show file flash://startup-config ! boot system rpm0 primary ftp://test:[email protected]//home/images/ E1200_405-3.1.2b1.86.bin boot system rpm0 secondary flash://FTOS-ED-6.1.1.0.bin boot system rpm0 default ftp://:@/\ ! redundancy auto-synchronize persistent-data redundancy primary rpm0 ! hostname E1200-20 ! enable password 7 94849d8482d5c3 ! username test password 7 93e1e7e2ef ! enable restricted 7 948a9d848cd5c3 ! protocol spanning-tree 0 bridge-priority 8192 rapid-root-failover enable ! interface GigabitEthernet 0/0 no ip address shutdown Related Commands format (C-Series and E-Series) format flash (S-Series) show file-systems Erase all existing files and reformat a filesystem on the E-Series or C-Series platform. Erase all existing files and reformat the filesystem in the internal flash memory on and S-Series. Display information about the file systems on the system. File Management | 43