Dell Force10 C300 FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series Tera - Page 528

www.dell.com | support.dell.com Defaults Command Modes Command History Disabled EXEC Privilege Version 7.6.1.0 Introduced on C, E, and S-Series disable c e s Globally disable GVRP. Syntax disable To re-enable GVRP, use the no disable command. Defaults Enabled Command Modes CONFIGURATION-GVRP Command History Related Commands Version 7.6.1.0 gvrp enable protocol gvrp Introduced on C, E, and S-Series Enable GVRP on physical interfaces and LAGs. Access GVRP protocol garp timers c e s Set the intervals (in milliseconds) for sending GARP messages. Syntax garp timers {join | leave | leave-all} To return to the previous setting, use the no garp timers {join | leave | leave-all} command. Parameters join leave leave-all Enter the keyword join followed by the number of milliseconds to configure the join time. Range: 100-2147483647 milliseconds Default: 200 milliseconds Note: Designate the milliseconds in multiples of 100 Enter the keyword leave followed by the number of milliseconds to configure the leave time. Range: 100-2147483647 milliseconds Default: 600 milliseconds Note: Designate the milliseconds in multiples of 100 Enter the keyword leave-all followed by the number of milliseconds to configure the leave-all time. Range: 100-2147483647 milliseconds Default: 1000 milliseconds Note: Designate the milliseconds in multiples of 100 Defaults Default as above 528 | GARP VLAN Registration (GVRP)