Dell Force10 E600i FTOS Version 8.4.1.5 Configuration Guide for ExaScale - Page 254

www.dell.com | support.dell.com PDU Counters FTOS version 7.5.1.0 introduces additional counters for various types of PDUs sent and received from neighbors. These are seen in the output of the command show ip bgp neighbor. Sample Configurations The following configurations are examples for enabling BGP and setting up some peer groups. These are not comprehensive directions. They are intended to give you a some guidance with typical configurations. You can copy and paste from these examples to your CLI. Be sure you make the necessary changes to support your own IP Addresses, Interfaces, Names, etc. Figure 12-8 is a graphic illustration of the configurations shown on the following pages. These configurations show how to create BGP areas using physical and virtual links. They include setting up the interfaces and peers groups with each other. Figure 12-8. Sample Configuration Illustration AS 99 Physical Links GigE 1/21 10.0.1.21 /24 Loopback 1 192.168.128.1 /24 GigE 1/31 10.0.3.31 /24 Virtual Links Peer Group AAA Peer Group CCC GigE 2/11 10.0.1.22 /24 Loopback 1 192.168.128.2 /24 GigE 2/31 10.0.2.2 /24 Peer Group BBB GigE 3/11 10.0.3.33 /24 Loopback 1 192.168.128.3 /24 GigE 3/21 10.0.2.3 /24 AS 100 254 | Border Gateway Protocol IPv4 (BGPv4)