Dell Inspiron 13 5320 Service Manual - Page 32

Touchpad, Removing the touchpad

Page 32 highlights

Steps 1. Adhere the coin-cell battery to the slot on the palm-rest and keyboard assembly. 2. Connect the coin-cell battery cable to the I/O board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Touchpad Removing the touchpad Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. 4. Remove the speakers. NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in Before working inside your computer. About this task The following image(s) indicate the location of the touchpad and provides a visual representation of the removal procedure. 32 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

Steps
1.
Adhere the coin-cell battery to the slot on the palm-rest and keyboard assembly.
2.
Connect the coin-cell battery cable to the I/O board.
Next steps
1.
Install the
base cover
.
2.
Follow the procedure in
After working inside your computer
.
Touchpad
Removing the touchpad
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
battery
.
4.
Remove the
speakers
.
NOTE:
Ensure that your computer is in Service Mode. For more information see, step 6 in
Before working inside your
computer
.
About this task
The following image(s) indicate the location of the touchpad and provides a visual representation of the removal procedure.
32
Removing and installing components